top of page

5 ltr Concentrated Aqua Wash

HIGH PERFORMANCE AQUA WASH // Incorporating a specially chosen blend of fully biodegradable surfactants designed to rapidly clean every part of your ski or boat safely and with ease. Provides a powerful, penetrating action which releases the correct amount of cleaning power to ensure perfect results every time, removing algae, grime, water marks, boot marks and traces of salt water with minimum effort, leaving a streak-free finish. This product is a refill, no empty bottle or trigger included.

USE-2-scaled.jpg.webp
Untitled-1-01.png

1 LTR

Why use it?​

  • This product is concentrated, making 10 x 1L, meaning you are getting twice for your money! As it is a refill, no empty bottle or trigger is included, but can be purchased separately.

  • Motoverde Aqua Wash is 100% salt-free, with no corrosive components in the product making it the safest cleaner on the market!

  • Fully biodegradable with recyclable packaging  will not cause any harm to lake/sea inhabitants.

  • Completely safe to use on all surfaces including paints, plastics, anodised parts, sensitive metals (including aluminium) and carbon fibre.

  • Tough on dirt but gentle to your ski/boat. Can also be used on your kit and helmets.

  • High-foaming product that clings to your ski/boat and does the work for you!

  • Contains UV protection to protect your paint colours from fading in sunlight.

  • Removes white spots/water marks.

​Instructions for use:​

  • Use previously purchased 1L Aqua Wash bottle and dilute product 50/50 with water (available to purchase in accessories if required).

  • Rinse excess dirt off ski/boat.

  • Apply Motoverde Aqua Wash, leave to soak for 15-20 minutes (5 minutes if in a rush). The longer soak time, the better the results as it is non-aggressive!

  • Rinse off.

  • For best results use Motoverde Aqua-Shine following.

  • For kits: add at least 250ml of concentrated product into a bucket of warm water and submerge your kit inside.

  • You can also throw in your goggles and straps before leaving to soak overnight.

  • The following morning, remove your goggles and straps and rinse under a tap until all chemical excess has been removed then leave to air dry.

  • Wash your kit at 30 degrees on a normal wash or sports wash.

  • At the end of the wash cycle your kit will be the cleanest you have seen it since the day you purchased it!

  • For helmets: simply spray product (once diluted) all over and leave to soak for 15 minutes before agitating with a brush/sponge if required. Rinse off!

For best results, use with our other products;

​

STEP 1 - ENGINE FLUSH

STEP 2 - AQUA WASH

STEP 3 - AQUA SHINE

Health & Safety​

  • Ingredients: Regulation (EC) No. 648/2004: <10% Amphoteric, Anionic and Non-Ionic surfactants. Benzisothiazoline.

  • Allergens: Contains 1, 2-benzisothiazolin-3-one. May produce an allergic reaction.

  • Keep out of reach of children. Store in a cool, dry place away from direct sunlight.

  • Warning: Causes serious eye irritation. Wash hands thoroughly after handling. Wear protective gloves/eye and face protection. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, seek medical attention.

bottom of page