top of page

25L Concentrated Bike Wash Refill

HIGH PERFORMANCE BIKE WASH. // Motoverde Bike Cleaner contains a premium blend of biodegradable surfactants. It will clean every part of your bike safely, and with ease. Even without any harsh chemicals, our salt-free formula provides a powerful, penetrating action! It will do the work for you and removes ingrained dirt, mud, grime and even sand and clay stains! Leaving a streak-free finish! Product comes with a drum tap. This product is a refill, no empty bottle or trigger included. Also available in 1L or 5L sizes!


Why use it?

  • This product is concentrated, making 50 x 1L, meaning you are getting twice for your money! Product comes with a drum tap. As it is a refill, no empty bottle or trigger is included, but can be purchased separately.

  • Motoverde Bike Wash is 100% salt-free, with no corrosive components in the product making it the safest cleaner on the market!

  • Fully biodegradable with recyclable packaging.

  • Safe for use on all E-Bikes.

  • Completely safe to use on all surfaces including paints, plastics, anodised parts, sensitive metals (including aluminium) and carbon fibre.

  • Tough on dirt but gentle to your bike. Our Bike Wash will remove mud, dirt and grime with ease, whilst also removing sand and clay stains. It can also be used on your kit, boots and helmets!

  • High-foaming product that clings to your bike and does the work for you!

  • Contains UV protection to protect your paint colours from fading in sunlight.

​Instructions for use:

  • Use Drum Tap for easy dispense of product.

  • Use previously purchased 1L Bike Wash bottle and dilute product 50/50 with water.

  • Rinse excess dirt off bike.

  • Apply Motoverde Bike Wash, leaving to soak for 15-20 minutes (5 minutes if in a rush). The longer soak time, the better the results as it is non-aggressive!

  • Agitate with a brush or sponge if required for stubborn dirt.

  • Rinse off.

  • For best results use Motoverde After-Shine following.

  • For kits: add at least 250ml of concentrated product into a bucket of warm water and submerge your kit inside.

  • You can also throw in your goggles and straps before leaving to soak overnight.

  • The following morning, remove your goggles and straps and rinse under a tap until all chemical excess has been removed then leave to air dry.

  • With trousers, place these on the floor and agitate the bottom area with a sweeping brush to loosen excess dirt before placing directly into your washing machine, alongside kit top.

  • Wash your kit at 30 degrees on a normal wash or sports wash.

  • At the end of the wash cycle your kit will be the cleanest you have seen it since the day you purchased it!

  • For boots and helmets: simply spray product (once diluted) all over and leave to soak for 15 minutes before agitating with a brush/sponge if required. Rinse off!

For best results, use with our other products;





Health & Safety

  • Ingredients: Regulation (EC) No. 648/2004: <10% Amphoteric, Anionic and Non-Ionic surfactants. Benzisothiazoline.

  • Allergens: Contains 1, 2-benzisothiazolin-3-one. May produce an allergic reaction.

  • Keep out of reach of children. Store in a cool, dry place away from direct sunlight.

  • Warning: Causes serious eye irritation. Wash hands thoroughly after handling. Wear protective gloves/eye and face protection. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, seek medical attention.

bottom of page