5 LTR ENGINE FLUSH

HIGH PERFORMANCE ENGINE FLUSH // Pro-GreenMX Engine Flush has been specially developed for flushing inboard and outboard engines. It contains a water-based, non-toxic, non-hazardous and fully biodegradable solution that contains properties to dissolve, release and remove salt crystals from any surface. Available in 1Ltr

Pro-GreenMX Graphics Logo.png
1L-Engine-Flush-1.jpg

1Ltr

Engine-Flush-Mix-Unit-1.jpg

Also available Engine Flush Mixing Unit

Why use it?​

  • Pro-GreenMX Engine Flush is 100% salt-free, with no corrosive components in the product.

  • Fully biodegradable with recyclable packaging.

  • Engine Flush dissolves and releases salt crystals from any surface.

  • Contains a built-in inhibitor that will leave behind a microfilm of protection inside the engine, preventing salt water corrosion to internal parts.

  • Regular use will prevent salt build-up in the cooling system and other areas.

  • It is completely safe for use on all sensitive metals including aluminium.

​Instructions for use:​

  • Add 80ml of Engine Flush into mixing unit.

  • Connect hose to mixing unit and connect the other end onto the engine flush port.

  • Turn water on and mixing unit to rinse.

  • Allow engine to run for 5 minutes to allow thermostat to open, allowing full flow of fresh water through the engine.

  • Before turning the engine off, switch unit to ‘Sailors Mate’. The exhaust will start to foam. Allow a further 30 seconds and then turn the engine off.

  • Allow to sit for 5 minutes.

  • Turn the mixing unit to ‘Rinse’ until all the foam has gone.

  • Turn the engine on and blow the ski out to remove any excess water that remains.

​

For best results, use with our other products;

​

STEP 1 - ENGINE FLUSH

STEP 2 - AQUA WASH

STEP 3 - AQUA SHINE

Health & Safety​

​​

  • Keep out of reach of children. Store in a cool, dry place away from direct sunlight.