1 LTR ENGINE FLUSH
HIGH PERFORMANCE ENGINE FLUSH // Pro-GreenMX Engine Flush has been specially developed for flushing inboard and outboard engines. It contains a water-based, non-toxic, non-hazardous and fully biodegradable solution that contains properties to dissolve, release and remove salt crystals from any surface. Available in 5Ltr
5Ltr
Why use it?
-
Pro-GreenMX Engine Flush is 100% salt-free, with no corrosive components in the product.
-
Fully biodegradable with recyclable packaging.
-
Engine Flush dissolves and releases salt crystals from any surface.
-
Contains a built-in inhibitor that will leave behind a microfilm of protection inside the engine, preventing salt water corrosion to internal parts.
-
Regular use will prevent salt build-up in the cooling system and other areas.
-
It is completely safe for use on all sensitive metals including aluminium.
Instructions for use:
-
Add 50ml of Engine Flush to mixing unit.
-
Connect hose to auto-mix unit and connect the other end onto the engine flush port.
-
Turn water on and mix unit to rinse.
-
Allow engine to run for 5 minutes to allow thermostat to open, allowing full flow of fresh water through the engine.
-
Before turning engine off, turn the auto-mix settings to Engine-Flush.
-
You will notice the exhaust will start to foam.
-
Allow a further 30 seconds and then turn the engine off.
For best results, use with our other products;
STEP 1 - ENGINE FLUSH
STEP 2 - AQUA WASH
STEP 3 - AQUA SHINE
Health & Safety
-
Keep out of reach of children. Store in a cool, dry place away from direct sunlight.