
Unit Motorcycle Products
Note: Not all items within the catalogue may be imported.
Tools
E1010 TIRE BEAD BREAKER STD
SPECIFICATIONS:
-
Heavy-duty tire bead breaker.
-
Long operation handle make bead breaking easy.
-
Wide bead breaker plate is designed for breaking wider bead breaking with one operation.
-
Rubber plate protects your tire and rims from scratches during bead breaking.
-
T shape body provides better stability.
-
Can be used tier size from 15 to 21 inches.
-
Material : Steel
-
Colour : Black

E8013 BOOTS WASH STAND WITH HANDLE
SPECIFICATIONS:
-
Stand designed for easy motocross boots washing.
-
Set boots up side down on the stand to wash with high pressure washer.
-
Water won’t enter inside of boot.
-
Easy to wash, keep boots on the stand to dry boots.
-
Compact design.
-
Material : Steel
-
Colour : Black
J0130 GPS / SMART PHONE HOLDER MOUNT
SPECIFICATIONS:
-
Convenient holder mount for attaching holders for GPS, navigation, smart phones.
-
Set a hang angle of 5 ° on the holder mount and horizontally Mirror hole type Lineup of 3 types for left and right and lever clamping.
-
Made of steel.


C4010 GRIP STAND
SPECIFICATIONS:
-
Easy to wash off muds underneath.
-
Able to use with angled bike.
-
Slip off rubber.
-
Light weight, Easy carry.
P131x SUSPENSION PROP BAR
SPECIFICATIONS:
-
Installed as an alternative during rear suspension overhaul.
-
Movable without rear suspension.
-
Range length 320mm to 480mm without notched increments.
-
Loop type and Bracket type
E780x HELMET HANGER
SPECIFICATIONS:
-
Wall hanging hook for your garage or van.
-
Can be hung on canopy pole with clamp bands and zip ties.
-
Not only hanging helmets, but also other items also.
-
Helps make your garage well organised.
-
Made of durable steel.
P3505 PIPE CLAMP SET
SPECIFICATIONS:
-
Front fork inner tube clamp set.
-
Hold your front fork tight to remove axle bracket.
-
Can be used with inner fork sizes from 46mm to 49mm.
-
Made of alumunum, to prevent damage to your front fork inner tube.
Please hold clamp with vice securely.
Hold the front fork tight to remove lower bracket.
E4010 WHEEL ROLLER
SPECIFICATIONS:
-
Allows a motorcycle wheel to be rotated for cleaning or chain maintenance.
-
3 different roller adjuster position allow wheel sizes from 10 to 19 inches.
-
Bearings inside rollers provide smooth rotation.
-
Can be used tire size up to 200 size.
-
Maximum weight : 200 kg (440 lbs)
-
Material : Steel
-
Colour : Black
E7520 WHEEL STAND
SPECIFICATIONS:
-
Hold the wheel during your maintenance of front suspension or rear swing arm.
-
Can be used as a wheel maintenance stand, to clean up wheel, for spoke nipple tightening and rim tape attaching.
-
Folding design saves space in your garage.
-
Comes with Axle shaft holder.
-
Can be used with below wheel size.
-
Material : Steel
-
Colour : Black
E880x SILENCER PLUG
SPECIFICATIONS:
-
Double soft rubber provides an excellent fit to keep water, bugs and dirt out of your exhaust system.
-
Comes with straps for easy removal from silencer end and storage.
-
Available in 2 different sizes.
-
Material : Rubber
-
Colour : Black
E1250 PORTABLE TIRE CHANGER
SPECIFICATIONS:
-
Folding type tire changer.
-
4 stage height adjustable system (575 mm - 920 mm).
-
Adopted clamp head shaft to minimize backlash.
-
Fit to shaft diameter 15 mm or more.
-
Tire lever pocket equipment.
-
Includes a gauge to check bending of the rim disk.
E1410 MOUSSE CHANGER
SPECIFICATIONS:
-
Tire changer designed for mousse tire change and easy bead removing.
-
Long bead breaker plate to easily push mousse tire down.
-
Long operation handle makes bead breaking easy, gives you enough space for tire levers between wheel rim and tire bead.
-
Comes with tire lever holder and tire changer fixed holes.
-
Can be used with wheel axle shaft size 20mm-22mm and 25mm-26mm, wheel size from 18inch to 21 inch.
-
Foldable design saves space in your garage or in your race van.
-
Durable steel frame holds wheel during tire change.
E1210 TIRE CHANGER w/BEAD BREAKER
SPECIFICATIONS:
-
Tire changer stand comes with bead breaker.
-
Easy to brake a bead with long operation bead breaker handle.
-
Great to use for mousse tire changes.
-
Easy to stick your tire levers. Bead breaker makes room for tire levers between tire bead and wheel rim,
-
Bead breaker plate can be adjust its position to fit most motorcycle tires.
-
Usable for wheel size up to 21 inch.
-
Shaft size : 16 mm
-
Material : Steel
-
Colour : Black
E1301 OPTION FOOT KIT (for E12xx TIRE CHANGER)
SPECIFICATIONS:
-
Tire changer stand leg set.
-
3 stand foots provides stability during tire changes.
-
Provides 600mm higher stand height.
-
Material : Steel
-
Colour : Black
